ZX6R 636: 2005-2006
4 Piston Caliper Adapter (Front Left NISSIN Caliper)
Kawasaki 4 piston adapter bracket alone $49.99 This adapter bracket must be used with our Kawasaki dual caliper brackets.
4 Piston caliper not included!
The following front left (clutch side) Honda 4 piston brake calipers that will fit this bracket are the Honda F4, F4i, 929, 954 and 98-99 CBR 900’s.
More Details
Learn How to Modify the 4 piston brake pad. This design will require the modification of your 4 piston brake pads. Due to the diameter of the rear wheel rotor no 4 piston caliper will fit completely on the rear rotor wear pattern so we recommend you trim your pads. The following front right Honda 4 piston brake calipers that will fit this bracket are the Honda F4, F4i, 929, 954 and 98-99 CBR 900's.
(2)
4 Piston Caliper Adapter (front Right NISSIN caliper)
Kawasaki 4 piston adapter bracket alone $49.99 This adapter bracket must be used with our Kawasaki dual caliper brackets.
4 Piston NISSIN caliper not included!
The following front right (Throttle side) Honda 4 piston brake calipers that will fit this bracket are the Honda F4, F4i, 929, 954 and 98-99 CBR 900’s.
More Details
Learn How to Modify the 4 piston brake pad. This design will require the modification of your 4 piston brake pads. Due to the diameter of the rear wheel rotor no 4 piston caliper will fit completely on the rear rotor wear pattern so we recommend you trim your pads. The following front right Honda 4 piston brake calipers that will fit this bracket are the Honda F4, F4i, 929, 954 and 98-99 CBR 900's.
(0)
2003-2004 636 ZX6R BIG Rotor "Upgrade" FR/FL
**********Note: 2-3 Week shipping delay on Kawasaki BigRotor Call or email for details**********
Upgrade includes 1 BIG Rotor, 1 front right (throttle side) NISSIN 4 piston adapter bracket and 1 front left (clutch side) NISSIN 4 piston adapter bracket.
Required footbrake caliper –> Honda front left 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Clutch side of bike front-end)
Required handbrake caliper –> Honda front right 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
More Details
A few good reasons to consider getting a BIG Rotor Kit 1. No brake pad trimming required 2. Better heat dissipation throughout braking system 3. Added braking power 4. More consistency in braking performance hot or cold 5. Going with the name you can trust with a solid reputation
(0)
Kawasaki 636 Dual Caliper Bracket (2003-2008)
Kawasaki 636 Dual Caliper Bracket offers superior braking abilities for your hand brake setup. With a dedicated hand brake line and caliper for your master cylinder you will experience effortless stopping power to bust out the sickest tricks with total security in your setup.
(3)
Kawasaki 636 Bracket COMBO DEAL (2003-2004)
Kawasaki 636 Dual Caliper Bracket offers superior braking abilities for your hand brake setup. With a dedicated hand brake line and caliper for your master cylinder you will experience effortless stopping power to bust out the sickest tricks with total security in your setup.
(5)
Full Package Deal
Add a Magura LEFT Hand Mastery Cylinder to your dual caliper bracket and brake line for the ultimate hand brake combination!
More Details
Package includes: - Dual Caliper Adapter - Steel Braided Brake Line - Magura LEFT HAND 13mm Master cylinder
(5)
2005-2006 636 ZX6R BIG Rotor "Upgrade" FR/GSXR
Upgrade includes 1 BIG Rotor, 1 front right (throttle side) NISSIN 4 piston adapter bracket and 1 Suzuki dual piston caliper adapter bracket.
Required footbrake caliper –> Suzuki dual piston caliper. Hayabusa 99-07 all TL1000R/S, 01-03 GSXR 600/750, 1988-1992 GSXR 750/1100 and Katana models (Make sure that your caliper is the same as pictured in our photo) Note 01-02 GSXR 1000 gold caliper will also works for this application.
Required handbrake caliper –> Honda front right 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
We all know by now that the NISSIN 4 piston is a phenomenal performing caliper when it comes to handbrake application but not everyone wants that much power for a footbrake so we have given you the choice to run a few different caliper configurations. Sorry for the minor inconvenience but Kawasaki owners will not be able to run your OEM single piston foot caliper but on the plus side you can now run dual or 4 piston caliper for your footbrake. We aimed towards making this upgrade as cost friendly as possible so if you have ever owned a HHD Kawasaki dual bracket all you need for this upgrade is 2 of our caliper adapter brackets and rotor (calipers not provided)
More Details
A few good reasons to consider getting a BIG Rotor Kit 1. No brake pad trimming required 2. Better heat dissipation throughout braking system 3. Added braking power 4. More consistency in braking performance hot or cold 5. Going with the name you can trust with a solid reputation
(0)
2005-2006 636 ZX6R BIG Rotor "Upgrade" FR/BREMBO
Upgrade includes 1 BIG Rotor, 1 front right (throttle side) NISSIN 4 piston adapter bracket and 1 Brembo dual piston caliper adapter bracket.
Required footbrake caliper –> Brembo Ducati/Aprilia 34mm Caliper Model 34G Gold/Black/Silver Rear Side inlet and Bleed
Required handbrake caliper –> Honda front right 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
(0)
2005-2006 636 ZX6R BIG Rotor "Upgrade" FR/FL
Upgrade includes 1 BIG Rotor, 1 front right (throttle side) NISSIN 4 piston adapter bracket and 1 front left (clutch side) NISSIN 4 piston adapter bracket.
Required footbrake caliper –> Honda front left 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Clutch side of bike front-end)
Required handbrake caliper –> Honda front right 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
(0)
2005-2006 636 ZX6R BIG Rotor "Upgrade" FR/FR
Upgrade includes 1 BIG Rotor and 2 front right (throttle side) NISSIN 4 piston adapter brackets.
Required handbrake & footbrake caliper –> Honda front right NISSIN 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
(0)
2005-2006 636 ZX6R BIG Rotor "Upgrade" FL/FL
Upgrade includes 1 BIG Rotor and 2 front left (clutch side) NISSIN 4 piston adapter brackets.
Required handbrake & footbrake caliper –> Honda front left 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Clutch side of bike front-end)
(0)
HHD Rearset Brackets
Hohey Designs billet aluminum rearset brackets are one of the strongest in the industry. Never miss another day of riding due to a broken rearset.
More Details
Made of solid air craft grade billet aluminum they offer the best protection a stunt rider can ask for. No more broken rear sets and missed practice time. They may bend but they wont break!
(6)
05/06 636-4 Piston Dual Caliper bracket Combo (2005-2006)
The HHD 4 piston dual caliper bracket combo includes steel braided brake line and combo bracket
(3)
05/06 636-4 Piston Dual Caliper bracket FULL SETUP (2005-2006)
The HHD 4 piston dual caliper full setup offers the best in handbrake performance. Featuring the HHD 4 piston dual caliper adapter and bracket, 80″ steel braided brake line, and Magura left hand master cylinder
(0)
636 or ZX6R 03-08 Top Triple Tree
Price comparisons OEM from a dealer $185.00 plus tax. $50.00 more you get unmatched quality and possibilities.Ours are heavy duty and dual purpose so you choose. Just a few things we considered when making ours.
*Includes spacer needed to install*
More Details
Note for dirt bike bar application Tag Metal 5mm plus height risers are required along with our HHD riser height adapters in order to clear the fork tube adjustments. ( TagMetal risers and HHD height adapters sold separately) TagMetal riser part numbers: Fat Dirt-Bars 1 1/8 Part # 4094 Standard 7/8 Dirt-Bar Part # 4092 1. You can use your oem ignition lock and lock your handlebars to the left and right. 2. We installed stainless steel helicoils in the pinch bolt locations for extended life off the threads so no stripping them out after periodic fork maintenance. 3. If running clipons you can still use a GPR or Scotts no problem! 4. If you haven\'t noticed Vortex clip-ons are very popular among us stunters and before to use them you needed to lower your front-end if running them on top of your triple (not the case anymore!) No more worrying about your fender smashing into your radiator. (Note each triple will come with \"2\" aluminum machined plugs to fill the riser bolt hole locations when not using risers) 5. Running dirt bike bars not a problem! We designed our triple to go perfectly with TAG METAL risers no need to stack washers anymore these bad boys fit perfect!. (We will be selling Tag Metal products soon!) 6.The biggest benefit is dual usage!!! Yeah you can go from clipons to dirt bike bars without messing with another triple ours will do the trick! **We have not yet fit our triple on a full fairng bike more info to come.
(1)
636 Dirt Bike Bar Riser Adapters
ur riser height adapters are only needed for 636 triple buyers who want to run dirt bike bars. These riser height adapters allow you to run dirt bike bars giving you the added height required to clear the fork tube adjustments. These are a must have item if you choose to run dirt bike bars with our Kawasaki triples.
(1)
Tag Metal Risers 1 1/8” +5mm
Tag Metal Risers 1 1/8” +5mm
(4)
2003-2004 636 ZX6R BIG Rotor "Upgrade" FR/BREMBO
**********Note: 2-3 Week shipping delay on Kawasaki BigRotor Call or email for details**********
Upgrade includes 1 BIG Rotor, 1 front right (throttle side) NISSIN 4 piston adapter bracket and 1 Brembo dual piston caliper adapter bracket.
Required footbrake caliper –> Brembo Ducati/Aprilia 34mm Caliper Model 34G Gold/Black/Silver Rear Side inlet and Bleed
Required handbrake caliper –> Honda front right 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
More Details
A few good reasons to consider getting a BIG Rotor Kit 1. No brake pad trimming required 2. Better heat dissipation throughout braking system 3. Added braking power 4. More consistency in braking performance hot or cold 5. Going with the name you can trust with a solid reputation
(1)
Rear Star Rotors
Everyone loves how they look, but lets be honest, your brakes are there for a reason! The funny thing is the design is what makes them stop better. When the low part of the Star Rotor, passes between the pads, it has a pocket of cool air that helps cool the pads. They are actually self cleaning, and self cooling! What makes our design more unique is the “Directional-Slotted” front rotors. The slots channel fresh/cool air between your pads and the rotor, so no gaseous boundary forms, and the slots constantly keep the pad surface new, this helps reduce pad “glazing”. Test show up to 30% more stopping power, that conventional designs.
More Details
Star Brake Rotors are made of laser cut, and parallel double disc ground 410 Stainless Steel. Our Front Full Floating Rotors have a center composed of aerospace 6061 Aluminum alloy (magnesium/silicon/titanium), with a T6 heat temper grade. Again thats all the technical stuff, what this means on the street/track is; Since they are laser cut, and parallel double disc ground, they have a stress free, perfectly flat surface, meaning a large contact patch from your pads to rotors. The higher the contact patch, the better the braking! The 410 Stainless steel, that they consist of has a melting point of just under 2800 degrees. It has good impact strength, and corrosion/scaling resistance up to 1200 degrees, so you can put them through the abuse. The 6061 Aluminum that makes up the center has a T6 temper grade, meaning its been heat treated, it also means the centers have a melting point of just under 1100 degrees!
(3)
Tag Metal Risers 7/8” +5mm
Tag Metal Risers 7/8” +5mm
(2)
Tag Metal Tag T2 Handlebars 1 1/8"
Tapered outer wall 1 1/8 to 7/8 for use with standard size grips and hand controls. Innovative, double butted inner wall design redefines industry standard for strength and vibration dampening. Cold forged from aircraft quality 7049 T-6 aluminum. Shot peened and anodized for greater durability. Knurled grip area to resist slippage.
(4)
STEEL BRAIDED HAND BRAKE LINE
STEEL BRAIDED HAND BRAKE LINE
Replacement 80″ steelbraided line
(3)
15CC BREMBO REMOTE 45 DEGREE RESERVOIR
15CC BREMBO REMOTE 45 DEGREE RESERVOIR
(3)
MAGURA LEFT HAND 13mm MASTER CYLINDER
Magura LEFT HAND 13mm master cylinder great for hand brake applications. This radial master offers a slightly softer feel than other radial masters with proven power braking power gains. Check out our set-up sample pictures and see why a left hand master is the way to go!
(Free banjo Bolt for a limited time)
(12)
TAG Metals - Moto Grips
Race up to 40% Longer before fatigue sets in
Suspension for your hands
Virtually NO BLISTERS on the palm of your hands
The SOFTEST grip material in motorcross
More Traction than any grip in the world
(4)
Custom Rear Sprocket
Custom Rear Sprockets are made in the USA with a full range of aftermarket sprockets. No hobbing, stamping, or punching! CNC profiling every tooth, no every sprocket helps ensure more uniform tooth concertricity. This means less chain stretch and longer sprocket life!
More Details
These sprockets are available in an assortment of colors: Red, Blue, Green, Black, Orange, Gold, Yellow, Pink, Purple, and Hard Koat ****Please specify Bike year make and model along with color in paypal notes when checking out.****
(3)
Big Rotor Adapter 05-06 ZX636
(0)
Big Rotor Adapter 05-06 ZX636
(0)
2003-2004 636 ZX6R BIG Rotor "Upgrade" FR/GSXR
**********Note: 2-3 Week shipping delay on Kawasaki BigRotor Call or email for details**********
Upgrade includes 1 BIG Rotor, 1 front right (throttle side) NISSIN 4 piston adapter bracket and 1 Suzuki dual piston caliper adapter bracket.
Required footbrake caliper –> Suzuki dual piston caliper. Hayabusa 99-07 all TL1000R/S, 01-03 GSXR 600/750, 1988-1992 GSXR 750/1100 and Katana models (Make sure that your caliper is the same as pictured in our photo) Note 01-02 GSXR 1000 gold caliper will also works for this application.
Required handbrake caliper –> Honda front right 4 piston. All Honda F4,F4i,929,954, 98-99 CBR 900 and 03-04 600RR’s (Throttle side of bike front-end)
We all know by now that the NISSIN 4 piston is a phenomenal performing caliper when it comes to handbrake application but not everyone wants that much power for a footbrake so we have given you the choice to run a few different caliper configurations. Sorry for the minor inconvenience but Kawasaki owners will not be able to run your OEM single piston foot caliper but on the plus side you can now run dual or 4 piston caliper for your footbrake. We aimed towards making this upgrade as cost friendly as possible so if you have ever owned a HHD Kawasaki dual bracket all you need for this upgrade is 2 of our caliper adapter brackets and rotor (calipers not provided)
More Details
A few good reasons to consider getting a BIG Rotor Kit 1. No brake pad trimming required 2. Better heat dissipation throughout braking system 3. Added braking power 4. More consistency in braking performance hot or cold 5. Going with the name you can trust with a solid reputation
(0)
Loading...
Popularity: 7% [?]
